auto gate tech
30% Tax Reduction in solar applications see your accountant firm for more information.

 

POWERMASTER MODEL P-1500- (SBG)

SINGLE ARM BARRIER GATE OPERATOR

ELECTRICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS
- 1/2 HP, 115V, 10
? Instant Reversing, Continuous Duty Motor, with Overload Protection
? 24V Control Circuit
? Heavy Duty, Across the Line, Motor Controller
? On/Off Power Switch
? Open/Close Switch on Control Panel
? Prewired to Accept Radio Controls, Reversing
Equipment, Loop Detector Systems, Automatic
Closing Timers, 7 Day Timers and Standard Control Stations.
- Compatible with all Types of Access Control Equipment and Automated Systems.
Single Gate Arms to 14'

12 Gauge Enclosure with Lockable Cover

45:1 Gear Reducer (Oil Bath Type)

Double Shaft Reduction System with #50 Chain and Sprockets and Roller Bearing Pillow Blocks

Adjustable Torque Limiting Clutch

Positive Cam Actuated Limit Switches

SINGLE ARM BARRIER GATE OPERATOR

 
ARCHITECTURAL SPECIFICATIONS:

POWERMASTER MODEL"P-1 500" BARRI ER GATE

THE OPERATOR HOUSING SHALL BE WEATHERPROOF, WITH REMOVABLE SIDE AND TOP WITH A KEY TO PREVENT UNAUTHORIZED ENTRY. HOUSING CONSTRUCTION TO BE FROM SHEET STEEL, OF NOT LESS THAN 12 GAUGE. ALL SEAMS TO BE ELECTRIC BEAD WELDED. PAINT FINISH SHALL BE BAKED ENAMEL OVER PRIMER.

MOTOR TO BE 1/2 HP, 115 VAC, 10 REVERSING DUTY TYPE. MOTOR SHALL BE INSTANTLY REVERSIBLE WITH BUILT IN OVERLOAD PROTECTION. MOTOR SHALL BE RESILIENTLY MOUNTED FOR QUIET OPERATION.

GEARBOX TO CONSIST OF A BRONZE WORM GEAR IN OIL BATH RUNNING IN ROLLER BEARINGS. A TORQUE LIMITING CLUTCH SHALL BE PROVIDED ON GEARBOX TO PREVENT OVERLOADING OF DRIVE MECHANISM. A SECONDARY REDUCTION SHAFT SHALL DIRECTLY OPERATE LIMIT SWITCHES.

SECONDARY SHAFT SHALL BE DRIVEN BY HEAVY DUTY #50 ROLLER CHAIN AND SPROCKETS. FINAL DRIVE SHAFT SHALL BE MINIMUM 1-1/4" DIAMETER STEEL SUPPORTED BY HEAVY DUTY ROLLER BEARINGS.

ELECTRICAL ASSEMBLY SHALL CONSIST OF A FULL VOLTAGE ACROSS THE LINE MOTOR CONTROLLER. A TRANSFORMER SHALL BE PROVIDED TO PROVIDE CONTROL CIRCUIT POWER AND POWER AUXILIARY CONTROL EQUIPMENT. CONTROL CIRCUIT TO BE CLASS 11, NOT TO EXCEED 24 VOLTS. CONTROL CIRCUIT TO PROVIDE FOR FULL FUNCTIONS AND TO ACCEPT RADIO CONTROLS, LOOP DETECTORS, AUTO CLOSE TIMERS AND ALL TYPES OF ACCESS CONTROLS WITHOUT ADDITIONAL MODIFICATIONS. SPECIAL LOOP DETECTOR CONTROL CIRCUIT SHALL BE PROVIDED THAT ALLOWS FOR VARIOUS CONTROL FUNCTIONS WITHOUT THE NEED FOR SPECIALIZED DETECTORS. A PREWIRIED TERMINAL STRIP SHALL BE PROVIDED FOR FIELD CONNECTIONS.

AN ON/OFF POWERSWITCH AND AN OPEN/CLOSE SWITCH SHALL BE PROVIDED ON OPERATOR CONTROL PANEL FOR LOCAL OPERATION AND SET-UP.

GATE ARM SHALL BE CONSTRUCTED OF 1" X 6" SOLID WOOD DESIGNED TO BREAK AWAY WHEN STRUCK BY A VEHICLE. OPERATOR SHALL ACCOMODATE GATE ARMS UP TO 14'.
 
For God sent not his Son into the world to condemn the world; but that the world through him might be saved. John 3:17
Greg Bradshaw gate equipment florida Email for more information.


designed by Langston Technologies, LLC (2010)